(678) 914-8907      Contact Us Today!

Your Local Georgia Plumbing Service   24/7 Emergency Hotline Call Now!

Your Local Georgia Plumbing Service   24/7 Emergency Hotline Call Now!

When it involves plumbing, a quandary heater is the most important thing that you need to make yourself comfortable. The degree of efficiency of the operating hot-water tank permits you to obtain hot water for bathing, cleaning your utensils, and provides all the comforts that having jam will bring, all work to a full stop. Once your heater stops operating properly, it is a serious problem.

Your hot-water tank may be the most costly element in your home’s plumbing, however, fortunately, diagnosis and fixing the issues of your water heater can be a bit tricky sometimes.

There are different problems which you can face when your water heater is not working properly. To understand those problems, let us have a look at the parts of a water heater to understand the problem well.

Components of the water heater components and their functions:

Normally, a water heater contains the following components:

  • A water tank with a capacity of 30-60 gallons.
  • A water intake.
  • A water heater outlet.
  • Lastly a valve for the drainage.

These parts can be seen by naked eyes. But there are other important parts that are not visible to you. Some of those are:

  • The element used to cause heating.
  • A dip tube which is used to transfer the incoming cold water to the bottom of the heater.
  • A rod made of metal.

Any damage to these parts will cause problems within the heater.

Let us have a look at some of the problems that you can face and the reasons why you need a plumber:

Generally, an electric water heater faces, same issues or problems which are often seen during the malfunctioning of gas water heaters. Below are the most common issues you will be facing in the water heaters that work with electricity.

  • Electrical hot-water tank isn’t offering the right amount of hot water – this is often presumably the reason that the thermostat might have got broken.
  • The water neither gets hot nor is it possible to keep the water hot for a long time– the electrical water heater’s higher and lower components are also dead.
  • The water becomes hotter than expected – The reason for the water becoming too hot can be that the thermostat of the heater has been put on the higher mode. The normal range of the thermostat to keep water hot to be used is about 110-140 Fahrenheit.
  • Faucet is releasing water, which seems to contain rust or otherwise stained – Corrosion could have occurred within the tank. This could also imply that the metal rod which is inserted in the tank to stop the corrosion is not working properly.
  • The hot-water tank is creating a huge noise – This sometimes could be caused in the lower layer that is designed abreast of electrical heating components. The other reason can be that the bottom may have a layer of excess sediments.
  • The water is giving off a bad smell – A bad smell from the water is presumably caused by microorganisms forming in deposited sediments.

Problems faced in gas water heaters:

There are many issues that you will encounter when using gas water heaters. Here are the ones that you can easily find:

  • The gas hot water tank isn’t manufacturing enough hot water – The most important of the problems is that the heater stops providing hot water. The problem can be related to the valves that are used to maintain the heat of the water.
  • The water doesn’t get hot enough to be used or doesn’t remain hot for a long time: The reason for such problems can be the amount of gas supplied to heat the water. There is a tube provided which is used to carry the incoming cold water to the bottom surface. The improper functioning of this tube also can cause this problem.
  • The faucet supplies water with rust in it– The reason for this problem can be due to the occurrence of rust. The corrosion of metal pipes can bring some rusts along with the water that comes out. The other reason can be that the metal rod which is placed to reduce the corrosion factor is not working properly.
  • A bad smell comes from the water– The reason for this is that some tiny organisms might have settled at the bottom of the tank.
  • The hot-water tank is producing high noises – The increase in the amount of sediments can lead the tank to make noises that are disturbing. Also, the boiling of water can cause some noises.
  • The hot-water tank is leaking – A leakage in the water tank bottom can cause a lot of problems. This indicates that the heat control valve is damaged.

Tankless water heater problems:

Here are the problems one can face with the tankless water heaters:

  • Deposition of unwanted minerals – Normally, water can cause the deposition of some minerals as it consists of hydrogen and oxygen. It is recommended to use a filter or something that can soften the water.
  • Combustion closing – it’s crucial that discharge should not to be confined in an exceedingly tankless hot water tank. Any fault in the installation, or discharge tubes that are too long, could end in improper exhaustion and an automatic shutdown.

You need to accept the fact that water heaters sometimes fail when you don’t think that they will. You need to be aware of all these problems, if you are going to fix the malfunctioning of your heater by yourself. If you don’t want to take a headache on yourself, it is better that you get the help of professional and hire a plumber when your water heater is not working properly. A plumber will take care of every problem and will also properly test the working of your water line and all those related to the water heater, so that, in the future you don’t run into any problem again. So, get a plumber.

 

top